SNV215 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES
| Brand Name: | Rolling Mills |
| Model Number: | SNV215 |
| Series: | 19000 |
| Cone Part Number: | 19138X |
| Cup Part Number: | 19262 |
| Design Units: | Imperial |
| Bearing Weight: | 0.20 Kg |
| Cage Type: | Stamped Steel |
| d: | 35.001 mm |
| D: | 66.675 mm |
Product Details
| Series | 19000 |
| Cone Part Number | 19138X |
| Cup Part Number | 19262 |
| Design Units | Imperial |
| Bearing Weight | 0.20 Kg |
| Cage Type | Stamped Steel |
| d | 35.001 mm |
| D | 66.675 mm |
| B - Cone Width | 16.520 mm |
| C - Cup Width | 11.908 mm |
| B | 15.875 mm |
| R - Cone Backface To Clear Radius1 | 2.030 mm |
| r - Cup Backface To Clear Radius2 | 0.76 mm |
| da - Cone Frontface Backing Diameter | 40.39 mm |
| db - Cone Backface Backing Diameter | 43.43 mm |
| Da - Cup Frontface Backing Diameter | 65.00 mm |
| Db - Cup Backface Backing Diameter | 60.96 mm |
| Ab - Cage-Cone Frontface Clearance | 2.3 mm |
| Aa - Cage-Cone Backface Clearance | 0.8 mm |
| a - Effective Center Location3 | -1.5 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 2960 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 11400 lbf |
| C0 - Static Radial Rating | 13000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2250 lbf |
| K - Factor7 | 1.31 |
| e - ISO Factor8 | 0.44 |
| Y - ISO Factor9 | 1.35 |
| G1 - Heat Generation Factor (Roller-Raceway) | 17.5 |
| G2 - Heat Generation Factor (Rib-Roller End) | 11.5 |
| Cg - Geometry Factor | 0.0694 |