6HR3065T+[175-3000/1]L THK Separated Linear Guide Side Rails Set Model HR
| Brand Name: |
THK |
| Model Number: |
6HR3065T+[175-3000/1]L |
| Engineering Group: |
Mounted Bearing |
| Bearing Number: |
22218 |
| Shaft Size: |
85 mm |
| Shaft Size Type: |
Metric |
| Full Timken Part Number: |
QASN18A085SB |
| Locking Style: |
Single Concentric |
| Weight: |
56 lb |
| Housing Style: |
Two-Bolt Pillow Block |
| PDF |
6HR3065T+[175-3000/1]L |
Product Details
| Engineering Group |
Mounted Bearing |
| Bearing Number |
22218 |
| Shaft Size |
85 mm |
| Shaft Size Type |
Metric |
| Full Timken Part Number |
QASN18A085SB |
| Locking Style |
Single Concentric |
| Weight |
56 lb |
| Housing Style |
Two-Bolt Pillow Block |
| UPC Code |
0883450354752 |
| Dimension A |
4.41 in |
| Dimension B |
8.35 in |
| Dimension C |
5.12 in |
| Dimension D Max |
11.50 in |
| Dimension D Min |
10.98 in |
| Dimension F |
13.58 in |
| Dimension G |
3.390 in |
| Dimension H |
1.54 in |
| Dimension J (Bolt Size) |
0.750 in |
| Dimension KA |
1.46 in |
| Dimension L |
4.29 in |
| Dimension M |
2.60 in |
| Dimension RA |
0.24 in |
| Dimension SA |
4.02 in |
| C0 - Static Load |
87200 lb |
| C - Dynamic Load (Basic) |
79700 lb |
| e - Geometry Factor |
0.23 |
| Y1 - Geometry Factor |
2.90 |
| Y2 - Geometry Factor |
4.31 |
| Oil Lubrication - M/N Seal |
1400 rpm |
| Oil Lubrication - T Seal |
2400 rpm |
| Oil Lubrication - B/C/O Seal |
1000 rpm |
| Grease Lubrication - M/N Seal |
1400 rpm |
| Grease Lubrication - T Seal |
2000 rpm |
| Grease Lubrication - B/C/O Seal |
1000 rpm |
| Float |
0.083 in |
| Shaft Tolerance |
0.0030 in |
| Eng Internal Radial Clearance - Min |
0.0024 |
| Eng Internal Radial Clearance - Max |
0.0039 |
| Pre Install Clearance Min |
0.0024 in |
| Pre Install Clearance Max |
0.0039 in |