| G2 - Heat Generation Factor (Rib-Roller End) | 10 |
| B | 19.050 mm |
| e - ISO Factor8 | 0.35 |
| C0 - Static Radial Rating | 12100 lbf |
| Aa - Cage-Cone Backface Clearance | 0.8 mm |
| Db - Cup Backface Backing Diameter | 55.12 mm |
| Design Units | Imperial |
| Cg - Geometry Factor | 0.0606 |
| Ab - Cage-Cone Frontface Clearance | 1.8 mm |
| Cage Type | Stamped Steel |
| Cup Part Number | 15245 |
| r - Cup Backface To Clear Radius2 | 1.27 mm |
| K - Factor7 | 1.67 |
| B - Cone Width | 20.638 mm |
| D | 61.999 mm |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 13500 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2090 lbf |
| G1 - Heat Generation Factor (Roller-Raceway) | 14.6 |
| da - Cone Frontface Backing Diameter | 35.56 mm |
| Bearing Weight | 0.30 Kg |
| 77250B Franke Slewing Ring Bearings | Basic dynamic load rating C:450 kN; Basic dynamic load rating - C:450 kN; Axial load factor Y:0.6; da min.:154 mm; ra - max.:2.5 mm; Fatigue load limit - Pu:57 kN; Width (mm):42; Reference speed:2800 r/min; D:250 mm; Bore Diameter (mm):250; r1,2 min.:3 mm; Limiting speed:3200 r/min; d1 ≈:179 m |
| 68526A Franke Slewing Ring Bearings | Prod_Type3:CRB_FRFS_PT_WLR; doh:4; Bore Diameter (mm):95; DE_:134; KBRG:4220; Size (mm):95x145x67; Weight:3,95 Kg; r_min:0.6; DA_:13; B_:67; SDM_:121; D_:145; C0:565; D2:150,4 mm; dx_min:158.5; da_min:101; r min.:0,6 mm; Width (mm):67; mass:3.95; d:95 mm; |
| 68966A Franke Slewing Ring Bearings | Basic dynamic load rating (C):13 kN; r2 min.:1 mm; d1:34,1 mm; d:25 mm; Db max:49,6 mm; Width (mm):15; B:15 mm; Weight:0,13 Kg; db min:30,6 mm; C:15 mm; (Grease) Lubrication Speed:26 000 r/min; Basic static load rating (C0):6,95 kN; rb max.:0,3 mm; ra max.:1 mm; Size (mm):25x52x15; Outer Diameter (m |
| 74104A Franke Slewing Ring Bearings | Da min (mm):26; Bearing number:GE15-AW; s (mm):10; D1 (mm):24; Category:Bearings; Product Group:B04264; d2 (mm):38,9; C0a (N):261000; Outer Diameter (mm):42; Size (mm):15x42x10.7; Manufacturer Name:SCHAEFFLER GROUP; d3 (mm):29; Weight (kg):0,12; Weight / Kilogram:0.144; Minimum Buy Quantity:N/A; dK |
| 68968A Franke Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:3.8 mm; Aa - Cage-Cone Backface Clearance:1.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:38600 N; B - Cone Width:22.500 mm; Cage Type:Stamped Steel; a - Effective Center Location3:6.1 mm; da - Cone Frontface Backing Diameter:105.92 mm; Design Units:M |
| 68723A Franke Slewing Ring Bearings | Seal Type:Aluminium Triple Lab; Maximum Speed:2790 rpm; Dimension L:380 mm; Dimension H2:242 mm; Shaft Size:90 mm; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Light Series; Dimension H:112 mm; Note:This product line wa; Cr - Dynamic Load Rating:42039 lbf; Dimension J:320 mm; Housing |
| 74106A Franke Slewing Ring Bearings | Noun:Bearing; Bore:0.625 Inch | 15.875; Harmonized Tariff Code:8483.20.40.40; Bearing number:PCJY5/8; Bolt Spacing:2.126 Inch | 54 Mill; Cartridge Pilot Diameter:0 Inch | 0 Millimete; Length Thru Bore:0.866 Inch | 22 Mill; Expansion / Non-expansion:Non-expansion; Category:Flange Block; A2:17,755 mm; |
| 68725A Franke Slewing Ring Bearings | r - Cup Backface To Clear Radius1:3.30 mm; G2 - Heat Generation Factor (Rib-Roller End):28.4; Y - ISO Factor4:1.79; Series:HH221400; Cg - Geometry Factor:0.107; D:190 mm; Cup Part Number:JHH221413; Db - Cup Backface Backing Diameter:170.94 mm; Design Units:METRIC; G1 - Heat Generation Factor (Roller |