| C1 - Dynamic Radial Rating (1 million revolutions)5 | 33200 N |
| db - Cone Backface Backing Diameter | 27.43 mm |
| Y - ISO Factor9 | 1.74 |
| R - Cone Backface To Clear Radius1 | 1.020 mm |
| G2 - Heat Generation Factor (Rib-Roller End) | 7.3 |
| Cg - Geometry Factor | 0.0474 |
| Db - Cup Backface Backing Diameter | 40.89 mm |
| G1 - Heat Generation Factor (Roller-Raceway) | 7.1 |
| B | 15.250 mm |
| K - Factor7 | 1.69 |
| Cage Type | Stamped Steel |
| Da - Cup Frontface Backing Diameter | 43.94 mm |
| da - Cone Frontface Backing Diameter | 25.91 mm |
| Bearing Weight | 0.10 Kg |
| C - Cup Width | 12.000 mm |
| e - ISO Factor8 | 0.35 |
| D | 47.000 mm |
| Series | 30204M |
| Cup Part Number | Y30204M |
| Ab - Cage-Cone Frontface Clearance | 2.8 mm |
| NNU4980S.M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Characteristic cage frequency, FTF:0.4 Hz; Lubrication hole on outer ring:Non/No; Width (mm):12,000; Characteristic rolling element frequency, BSF:4.8 Hz; ras max:0.3 mm; E:18 mm; Bore Diameter (mm):12,000; Lw:8.8 mm; db:17.6 mm; Min operating temperature, Tmin:-20 °C; C:12,000 mm; Cr:8.65 kN; Radia |
| NNU4976S.M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Outer Diameter (mm):47; d:30 mm; Width (mm):18; B:18 mm; Bore Diameter (mm):30; Size (mm):30x47x18; Basic dynamic load rating (C):10,8 kN; Bearing number:4606-3AC2RS; D:47 mm; C:18 mm; |
| NNU4968S.M.P53 Rolling Mills Sealed spherical roller bearings continuous casting plants | Size (mm):130x180x24; C:24 mm; Bore Diameter (mm):130; D:180 mm; B:24 mm; d:130 mm; Bearing number:NP1926; Width (mm):24; Outer Diameter (mm):180; |
| NNU4972S.M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | (Grease) Lubrication Speed:6885 r/min; B:26 mm; Bearing number:33108; Width (mm):26; D:75 mm; Basic dynamic load rating (C):77 kN; T:26 mm; d:40 mm; Outer Diameter (mm):75; Size (mm):40x75x26; Bore Diameter (mm):40; C:20,5 mm; Basic static load rating (C0):101 kN; Weight:0,51 Kg; |
| NNU4960S.M.P53 Rolling Mills Sealed spherical roller bearings continuous casting plants | Minimum Buy Quantity:N/A; Harmonized Tariff Code:8482.10.50.28; UNSPSC:31171531; Long Description:50MM Bore; 80MM Outs; Inch - Metric:Metric; Weight / Kilogram:0.51; Angle (α):15 °; Number of Bearings:2 (1 Pair); Mounting Arrangement:Duplex-Face to Face; Rolling Element:Ball Bearing; Noun: |
| NNU4952S.M.P53 Rolling Mills Sealed spherical roller bearings continuous casting plants | a:23 mm; da:92 mm / Tolerance: h; ra1 max:0,6 mm; m:0,465 kg / Weight; nG Fett:15000 1/min / Limiti; α:15 ° / Angle; Size (mm):85x120x18; Bore Diameter (mm):85; Width (mm):18; C0r:23300 N / Static loa; Da:114 mm / Tolerance:; d:85 mm; D:120 mm; ra max:0,6 mm; B:18 mm; Cr:47000 N / Dynamic |
| NNU4964S.M.P53 Rolling Mills Sealed spherical roller bearings continuous casting plants | Width (mm):42; Bore Diameter (mm):140; a:77,3 mm; Outer Diameter (mm):250; C:42 mm; Size (mm):140x250x42; d:140 mm; Bearing number:7228 A; D:250 mm; B:42 mm; Angle (α):25 °; |
| NNU4956S.M.P53 Rolling Mills Sealed spherical roller bearings continuous casting plants | D:111,125 mm; a:7,6 mm; d:44,45 mm; Size (mm):44.45x111.125x30.162; Basic dynamic load rating (C):118 kN; Outer Diameter (mm):111,125; Bore Diameter (mm):44,45; Bearing number:55176C/55437; C:20,638 mm; Width (mm):30,162; B:26,909 mm; Weight:1,44 Kg; T:30,162 mm; (Grease) Lubrication Speed:3200 r/mi |