Try different search 57636 FAG Cylindrical Roller Bearings |
|---|
| No. | Brand | O.D. | I.D. | Length | End Cap | By-Pass | Adhesive | Efficiency | Media Type |
| SF576366-6UMV | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Epoxy | 5 Micron | Phenolic Impregnated one side |
| SF576366-1UMV | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Epoxy | 1 Micron | Phenolic Impregnated one side |
| SF576366-25UM | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Polyurethane | 25 Micron | Phenolic Impregnated one side |
| SF576366-8203 | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Polyurethane | 10 Micron | Phenolic Impregnated one side |
| SF576366-6UM | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Polyurethane | 5 Micron | Phenolic Impregnated one side |
| SF576366-1UM | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Polyurethane | 1 Micron | Phenolic Impregnated one side |
| SF576366-8203V | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Epoxy | 10 Micron | Phenolic Impregnated one side |
| SF576366-25UMV | Swift Filters | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Epoxy | 25 Micron | Phenolic Impregnated one side |
| 576366-5110 | Marvel | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Polyurethane | 10 Micron | Phenolic Impregnated one side |
| 576366-7110 | Marvel | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Polyurethane | 10 Micron | Phenolic Impregnated one side |
| 576366-5105 | Marvel | 4.5 | 2.27 | 7.25 | Corrosion Resistant CS/AL | None | Polyurethane | 5 Micron | Phenolic Impregnated one side |
| 530488 FAG Cylindrical Roller Bearings | Ew:29 mm; Size (mm):22x29x16; Fw:22 mm; Bearing number:KZK22X29X16; Bore Diameter (mm):22; Width (mm):16; B:16 mm; Outer Diameter (mm):29; |
| 523399 FAG Cylindrical Roller Bearings | (Grease) Lubrication Speed:4800 r/min; D:80,167 mm; Outer Diameter (mm):80,167; B:25,4 mm; Basic dynamic load rating (C):75,8 kN; Width (mm):25,4; d:41,275 mm; Size (mm):41.275x80.167x25.4; Bearing number:26882/26820; a:7,4 mm; T:25,4 mm; C:19,05 mm; Basic static load rating (C0):89,2 kN; Bore Diame |
| 567725A FAG Cylindrical Roller Bearings | db (min):78.5 mm; Static Load Rating:151,000 N; Da (max):116.5 mm; D:125 mm; Radial Clearance:0.040 to 0.075 mm; ra (max):1.5 mm; ra1 (max):1.5 mm; Weight:1.520 kg; dd (min):92 mm; r1:1.5 mm; Bore Type:Cylindrical Bore; db (max):82 mm; dc (min):86 mm; Configuration:Single Row; Fillet Radius/Chamfer: |
| 514445B FAG Cylindrical Roller Bearings | Width (mm):25,4; Weight:0,135 Kg; C:25,4 mm; C2:2,8 mm; Bearing number:BAM 3616; Basic static load rating (C0):85,7 kN; Bore Diameter (mm):57,15; Fw:57,15 mm; Basic dynamic load rating (C):39,3 kN; Size (mm):57.15x66.675x25.4; D:66,675 mm; Outer Diameter (mm):66,675; |
| 533023 FAG Cylindrical Roller Bearings | Width (mm):13; Cr:13000 N / Dynamic lo; Outer Diameter (mm):80; Da:75,5 mm / Tolerance:; nG Fett:30000 1/min / Limiti; D:80 mm; Size (mm):55x80x13; C0r:6000 N / Static load; Bore Diameter (mm):55; rmin:1 mm; a:16 mm; B:13 mm; α:15 ° / Angle; da:60 mm / Tolerance: h; ra max:0,6 mm; d:55 mm; |
| 541646 FAG Cylindrical Roller Bearings | Weight:17.50 lb; Taper:1:12; Threads No. per Inch:8; Major Dia - B:7.331 in; A:6.713 in; d:5.906 in; G:0.945 in; L:5.748 in; F:0.178 in; |
| 513378A FAG Cylindrical Roller Bearings | Housing Width:0.75 Inch | 19.05 Mi; Noun:Bearing; Material - Liner:Not Applicable; Mass plain bearing:0.12 kg; r1 min.:0.3 mm; Material - Outer Member:Steel; Overall Width:0.875 Inch | 22.225; Design (sliding contact surface combination):Steel/steel; Minimum Buy Quantity:N/A; inner ring material:Chr |
| 546335 FAG Cylindrical Roller Bearings | B:14 mm; Fillet Radius/Chamfer:1 mm; Limiting Speed - Oil:14,000 rpm; Enclosure:Open; Radial Clearance:0.015 to 0.033 mm; ra (max):1 mm; da (min):40 mm; d:35 mm; D:62 mm; Limiting Speed - Grease:12,000 rpm; Configuration:Single Row; Factor fo:14.8; Static Load Rating:10,300 N; Da (max):57 mm; Bore T |