| G1 - Heat Generation Factor (Roller-Raceway) | 56 |
| C90 - Dynamic Radial Rating (90 million revolutions)5 | 5760 lbf |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 38700 lbf |
| Series | 395 |
| C1 - Dynamic Radial Rating (1 million revolutions)6 | 22200 lbf |
| da - Cone Frontface Backing Diameter | 2.76 in |
| C0 - Static Radial Rating | 28100 lbf |
| R - Cone Backface To Clear Radius3 | 0.14 in |
| Cg - Geometry Factor | 0.0984 |
| Aa - Cage-Cone Backface Clearance | 0.05 in |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 3970 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 10000 lbf |
| d | 2.5000 in |
| K - Factor8 | 1.45 |
| a - Effective Center Location4 | -0.03 in |
| Cone Part Number | 395 |
| G2 - Heat Generation Factor (Rib-Roller End) | 21.4 |
| db - Cone Backface Backing Diameter | 3.03 in |
| Design Units | Imperial |
| Ab - Cage-Cone Frontface Clearance | 0.11 in |
| 513378A FAG Cylindrical Roller Bearings | Housing Width:0.75 Inch | 19.05 Mi; Noun:Bearing; Material - Liner:Not Applicable; Mass plain bearing:0.12 kg; r1 min.:0.3 mm; Material - Outer Member:Steel; Overall Width:0.875 Inch | 22.225; Design (sliding contact surface combination):Steel/steel; Minimum Buy Quantity:N/A; inner ring material:Chr |
| 523399 FAG Cylindrical Roller Bearings | (Grease) Lubrication Speed:4800 r/min; D:80,167 mm; Outer Diameter (mm):80,167; B:25,4 mm; Basic dynamic load rating (C):75,8 kN; Width (mm):25,4; d:41,275 mm; Size (mm):41.275x80.167x25.4; Bearing number:26882/26820; a:7,4 mm; T:25,4 mm; C:19,05 mm; Basic static load rating (C0):89,2 kN; Bore Diame |
| 530488 FAG Cylindrical Roller Bearings | Ew:29 mm; Size (mm):22x29x16; Fw:22 mm; Bearing number:KZK22X29X16; Bore Diameter (mm):22; Width (mm):16; B:16 mm; Outer Diameter (mm):29; |
| 533023 FAG Cylindrical Roller Bearings | Width (mm):13; Cr:13000 N / Dynamic lo; Outer Diameter (mm):80; Da:75,5 mm / Tolerance:; nG Fett:30000 1/min / Limiti; D:80 mm; Size (mm):55x80x13; C0r:6000 N / Static load; Bore Diameter (mm):55; rmin:1 mm; a:16 mm; B:13 mm; α:15 ° / Angle; da:60 mm / Tolerance: h; ra max:0,6 mm; d:55 mm; |
| 514445B FAG Cylindrical Roller Bearings | Width (mm):25,4; Weight:0,135 Kg; C:25,4 mm; C2:2,8 mm; Bearing number:BAM 3616; Basic static load rating (C0):85,7 kN; Bore Diameter (mm):57,15; Fw:57,15 mm; Basic dynamic load rating (C):39,3 kN; Size (mm):57.15x66.675x25.4; D:66,675 mm; Outer Diameter (mm):66,675; |
| 567725A FAG Cylindrical Roller Bearings | db (min):78.5 mm; Static Load Rating:151,000 N; Da (max):116.5 mm; D:125 mm; Radial Clearance:0.040 to 0.075 mm; ra (max):1.5 mm; ra1 (max):1.5 mm; Weight:1.520 kg; dd (min):92 mm; r1:1.5 mm; Bore Type:Cylindrical Bore; db (max):82 mm; dc (min):86 mm; Configuration:Single Row; Fillet Radius/Chamfer: |
| 541646 FAG Cylindrical Roller Bearings | Weight:17.50 lb; Taper:1:12; Threads No. per Inch:8; Major Dia - B:7.331 in; A:6.713 in; d:5.906 in; G:0.945 in; L:5.748 in; F:0.178 in; |
| 546335 FAG Cylindrical Roller Bearings | B:14 mm; Fillet Radius/Chamfer:1 mm; Limiting Speed - Oil:14,000 rpm; Enclosure:Open; Radial Clearance:0.015 to 0.033 mm; ra (max):1 mm; da (min):40 mm; d:35 mm; D:62 mm; Limiting Speed - Grease:12,000 rpm; Configuration:Single Row; Factor fo:14.8; Static Load Rating:10,300 N; Da (max):57 mm; Bore T |