5HR918M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[46-300/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR

Brand Name:THK
Model Number:5HR918M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[46-300/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M
Bearing number:627-2RSLTN9/HC5C3WTF1
Size (mm):7x22x7
Bore Diameter (mm):7
Outer Diameter (mm):22
Width (mm):7
d:7 mm
D:22 mm
B:7 mm
PDF 5HR918M[F(AP-C),​F(AP-CF),​F(AP-HC)]+[46-300/1]L[F(AP-C),​F(AP-CF),​F(AP-HC)]M

Product Details

Bearing number627-2RSLTN9/HC5C3WTF1
Size (mm)7x22x7
Bore Diameter (mm)7
Outer Diameter (mm)22
Width (mm)7
d7 mm
D22 mm
B7 mm
C7 mm
d1– mm
d210,6 mm
r1 min.0,3 mm
r2 min.0,3 mm
D219,2 mm
da min.9.4 mm
da max10,5 mm
Da max.19.6 mm
ra max.0.3 mm
Weight0,012 Kg
Basic dynamic load rating (C)3,45 kN
Basic static load rating (C0)1,37 kN
Fatigue load limit (Pu)0,057
Reference speed95000 r/min
Limiting speed53000 r/min
Calculation factor (f0)12
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Product GroupB00308
Enclosure2 Seals
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesSilicon Nitride Rolling Element | Electrical Insulated
Cage MaterialPolyamide
Enclosure TypeContact Seal
Internal ClearanceC3-Loose
Inch - MetricMetric
Long Description7MM Bore; 22MM Outside Diameter; 7MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; Silicon Nitride Rolling Element | Electrical Insulated Internal Special Fe
Other FeaturesDeep Groove | Low Friction | NBR Seal | Hybrid Silicon Nitride Rolling Element | WT Standard Grease | F1 Grease Fill
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Weight / LBS0.012
Bore0.276 Inch | 7 Millimeter
Outer Race Width0.276 Inch | 7 Millimeter
Inner Race Width0 Inch | 0 Millimeter
Outside Diameter0.866 Inch | 22 Millimeter
d2 ≈10.6 mm
D2 ≈19.2 mm
r1,2 min.0.3 mm
da max.10.5 mm
Basic dynamic load rating C3.45 kN
Basic static load rating C01.37 kN
Fatigue load limit Pu0.057 kN
Calculation factor kr0.025
Calculation factor f012.3
Mass bearing0.012 kg
View more

Company Profile

View more

Related News

  • How are hydraulic components rebuilt, repaired orJun 27, 2016 — A hydraulic pump before remanufacturing Not surprisingly, the price of a repaired or rebuilt component can vary widely depending on the  Repair, Replace or Rebuild Hydraulic...
  • Temperature Rise in a Centrifugal Pump - the World of PumpsWe have to prepare temp rise curves for both & compare their nature. Assume that the pumped liquid is water at 150 C. Fig. 1: Performance curve of a 8 stage  Temperature rise in...
  • Hydro Pump Repair or Replace? How much would you payAug 12, 2010 — Lets say a new hydro pump cost 650.00, to rebuild you current pump the cost is $325.00 Would you repair or replace your pump? Im asking this  Repair, Replace or Rebuild...
  • Recommended Products

    All Products Contact Now